Rocan PureKleen SN – Efflorescence Remover


Rocan PureKleen SN – Efflorescence Remover


5 Litres

Rocan PureKleen SN is a highly effective salt neutraliser for concrete and stone.

Add To Cart

Key Facts:

  • Efficient in removing cement, concrete and mineral deposits by de-structuring cement and mineral deposits on all substrates.

  • Far less hazardous than citric, hydrochloric and phosphoric acid based products.

  • Formulated as a consequence of increasing demands put on users in terms of safety, compliance, impact on the environment and sustaining treated substrates. Indeed, unlike traditional acid products.

  • Not classified as corrosive and is biodegradable and totally inert to all surfaces (does not damage glass, metal and plastic, and is non- corrosive).

  • Capable of removing cement, concrete and mineral deposits on fragile substrates such as metal (including steel and aluminium), glass, rubber and gloss paints, without changing their appearance.

  • Ideal for mineral substrates and does not change the surface porosity.

Advantages and Characteristics:

  • No neutralisation on required.

  • Over 90% biodegradable.

  • Risk-free for the user & environment.

  • Suitable for all surfaces: metal, glass, rubber, paints, etc…

  • Powerful remover and fast acting.

  • Non-corrosive; non-irritant & water-borne.

  • Suitable for floors & walls.

  • Exterior & interior use.

  • Easy & quick to use.

  • Comes as a concentrate. Add water as follows depending on degree of contamination: 1:1 heavy; 1:5 medium; 1:10 light.

Instructions for Application of Rocan PureKleen SN:

“Always test apply on a small hidden portion of the substrate”

  • Always test apply on a small hidden portion of the substrate before applying.

  • PureKleen-SN is a concentrate and requires water to be added as appropriate.

  • Shake the container well before use.

  • Apply using a low pressure hand spray unit or brush.

  • Allow the product act for 5 to 30 minutes (the time required varies depending on the size of the laitance and the thickness of the material deposits being re- moved).

  • Rinse the entire substrate with a high pressure washer once the material deposits have softened. Otherwise, brush on using a thick bristle broom, and then rinse with water from a hosepipe whilst brushing at the same me.

  • Avoid allowing the product to dry prior to rinsing.

  • To prevent future soiling, it is recommended to use Rocan PureScape

For more information or if you have any questions – don’t hesitate to call our order hotline!

Before and After

IMG00089-20110513-1213 (1).jpg